Newsletter Signup: Text HTML 
 

Ask the Expert
The Topic: Six Sigma and Return on Investment

 
 

John Lopez-Ona
President
Six Sigma Qualtec
Tempe, Arizona

Q: Why do you think people hear stories about companies
failing to achieve adequate return on their Six Sigma
investment?

A: We hear stories about these failures because they occur. The question is why do they occur? One significant reason a program doesn't achieve targeted returns is a lack of senior management commitment. Invariably when this is lacking, the initiative becomes a training exercise characterized by poorly conceived or poorly supported projects rather than a plan to drive business results with projects based on relevant business cases. Training is expensive. A big expense with no focus on results yields little or no returns.

If I were tasked with a Six Sigma project which management wasn't fully supporting, I'd scale back my expenses to match to the number of good projects I could convince well-intentioned Champions to support. By driving results on those projects while maintaining low expenses, I'd ensure a high return on investment which I would market internally to gain the senior support needed to ensure success of a larger expenditure.

Q: How do you measure Return on Investment (ROI) in a Six Sigma initiative?

A: The return on any investment compares the costs, or investment, over time to returns over time, discounted by a risk-adjusted rate to take into account the value of money over time. Due to the tremendous impact of Six Sigma, the most sensitive variable in this calculation is the returns, and not the costs.

Returns can be segregated into hard and soft savings. Hard savings are those that are more easily traceable to actual cash, like reduced waste or headcount reductions. Soft savings are those that are less "bankable" like reductions in cycle times. While hard savings calculations are pretty much the same from project to project and company to company, there is tremendous room for interpretation with soft savings. Common and simple errors in calculating soft savings are things like counting gross sales improvements rather than the net from sales, or measuring working capital reductions rather than the reduced financing costs. But even with all the room for interpretations and mistakes in soft savings, not to develop an accepted methodology for assigning value would disregard a significant source of benefits.

Whether hard or soft, one interesting observation is that few organizations calculating returns differentiate between one-time and recurring savings. Recurring savings obviously are worth a multiple of one-time savings and should be counted by calculating the present value of the related cash flows over the time period they recur. I think organizations don't do this in the interest of being conservative, but they don't realize how conservative it is.

However, the greatest difficulty in measuring ROI in any performance improvement initiative is assigning value to non-cash-yielding improvements, like if the initiative boosts sales growth rates or advances the company's competitive position.

 

These kind of improvements can impact a company's intrinsic value, thus creating shareholder value well in excess of any project savings. To assign value to such improvements, one must look to more sophisticated valuation theories such as Economic Value Analysis, which addresses shareholder value in a more significant way.

Q: What are the critical success factors in achieving a satisfactory ROI?

A: The most critical success factor is project selection.

If ROI is your objective, you have three variables with which to maximize it – lower the investment, raise the annual returns, or reduce the time in which gains are achieved. The most sensitive variable is raising targeted returns. Returns are a function of many interrelated variables. Some of these are the quality of the training event, the quality of the candidates, senior management support and the size of the opportunity. But I would argue that the most sensitive variable is the selection of projects.

The success of projects is most dependent on alignment to the company's initiatives, assuming the initiatives have been correctly aligned to stakeholder concerns. In its simplest form, the initiative could be cost savings. Of course, once again, targeting strategic goals that redefine the company can have a much greater effect on the returns on an initiative.

A good program will hit enough hard savings projects to achieve an acceptable ROI, move to goals with even greater impact, such as revenue projects that can change the company's growth rate, and finally, move to goals aimed at redefining the company's competitive position.

Q: In this tough economic climate, why should companies spend money on Six Sigma?

A: Quite simply, there are few investments that can provide the same rate of return. However, once the low hanging fruit is harvested, the success of the implementation becomes more about alignment to the right problems – and that is a more difficult objective.


 

Reader Feedback
Do you have a series of four to five questions focused on a specific Six Sigma topic? Would you like to have them answered by an industry expert? Make sure they are general enough to help a broad audience, and submit your topic along with the four to five questions to iSixSigma Experts.

 

 

Best Selling Products

  1. Six Sigma DMAIC Training Slides
    The complete 2008 Lean Six Sigma DMAIC course prepares participants to perform the role of a LSS Black Belt; covering wh...
  2. Certified Lean Six Sigma Black Belt Assessment Exam
    Interested in assessing your knowledge of Lean Six Sigma? Preparing for certifications? Testing your students and traine...
  3. Process Management Training Slides
    The 2008 Process Management course is designed in two phases comprised of:352 Powerpoint slidesInstructor notesSlide exp...
  4. Certified Lean Six Sigma Green Belt Assessment Exam
    This assessment exam is useful for students interested in assessing their knowledge of Lean Six Sigma on the Green Belt ...
  5. Certified Lean Six Sigma Black Belt E-book
    In 670 pages learn everything within the Lean Six Sigma DMAIC body of knowledge to successfully achieve Black Belt certi...
  6. Gage R&R Excel Template
    Gage Repeatability and Reproducibility (R&R) studies measure the amount of measurement variation that is attributabl...
  7. Six Sigma Black Belt (DMAIC) Training Slides
    The 2008 Six Sigma Black Belt course is comprised of: 1,176 PowerPoint slides, Instructor notes, Slide explanations, 37 ...

Premium Sponsor:

Accenture, Process & Improvement Performance, formerly George Group

Sponsors:

Achieve Operational Excellence: Oriel

Advance your Military Career with Six Sigma Programs from Villanova University

MoreSteam: The Engine Room of Continuous Improvement

Novaces: Six Sigma for the Military

Sponsor iSixSigma Military



 

About iSixSigma Military

The purpose of this iSixSigma Military channel is to document the transformation of the United States Armed Services through the use of Lean Six Sigma and related process improvement methodologies.

Ronald E. Rezek, special assistant to the acting secretary of the Army, has said the goal of the Army's Lean Six Sigma deployment is to "make the business side of the Army as efficient as the war-fighting side is effective." Leaders of the other armed services echo that sentiment and transformation objective.

This portal will serve as a central community for everyone associated with the business transformation of the U.S. military. It will provide communication updates on deployments, the opportunity for military leaders at all levels to learn new skills, advance their careers and contribute to the success of their organizations.